The Encore 225 is a complete audio solution allowing you to keep all your music in one place. It accepts almost any conceivable analog or digital audio source. It is also compatible with many network speakers, such as Sonos. There is a very clear, large, high resolution full colour display so you can see what’s going on.

Inputs

3 x Line Level RCA 300mV nominal 2V typical up to 7V rms

2 x optical S/PDIF 24 bit inputs up to 192kHz

2 x coax S/PDIF 24 bit inputs up to 192kHz

1 x USB 3.0 type ‘A’ connector

1 xUSB 3.0 type “B” connector (for future expansion)

3 x USB2.0 type ‘A’ connector (1 front, 2 rear)

10/100/1000 Base-T Ethernet connector

Outputs

1x line level FIXED 2.0V @ 0dBFS (300mV rms nominal, >6V rms max)

1x line level PREAMP variable outputs (>6V rms max) (Preamp gain, line input to PREAMP outputs is 4.5x (13dB) at maximum volume)

Headphone output suitable for headphones impedance 8 ohms to ∞. (Headphone output features independent volume setting)

Speaker outputs 1 pair 4mm banana plugs per channel

1x optical S/PDIF 24-bit output up to 192kHz

1x coax S/PDIF 24-bit output up to 192kHz

Internal storage 2.5” 1 TB SATA II hard disk (included) or SSD (future upgradeable)